Port to BSNL: Maximum telecom operators in India have recently increased their mobile tariff plan prices by up to 15 percent. If you are planning to switch to BSNL from jio, vi & airtel due to its affordable recharge plans, here’s the process how you can do it.

There are so many users in India are ready to switch from jio, vi & airtel to BSNL after a recent tariff revision. Telecom companies such as Jio, Vi, and Airtel have increased the prices of both their prepaid and postpaid recharge plans by an average of 15 percent. Additionally, the annual recharge plans from these telecom operators have increased by approximately Rs 500 to Rs 600.

BSNL is also taking advantage of this situation. The state-owned company is actively promoting its recharge plans, which are more affordable when compared to other recharge plans from other telecom operators. The company is working on 2G/3G network and its 4G services are currently available in selected circles of the country. It is also expected to roll out its 4G services across the country next month.

Considering the above-mentioned factors, if you are planning to port your existing mobile number to BSNL, here is a step-by-step guidelines on how you can port your existing mobile number to BSNL.

These are the steps on how you can port your existing mobile number to BSNL

Step 1: get a Unique Porting Code (UPC) by sending an SMS to 1900 in the format ‘Port Space 10 digit mobile number’. For example, send PORT 8887774440.

If you are a prepaid mobile subscriber in Jammu & Kashmir, call 1900 instead of sending an SMS.
The UPC allocated to you will be valid for fifteen days from the date of request for all service areas, except for Jammu & Kashmir, Assam, and North East licensed areas, where the validity period will be thirty days.

Step 2: Visit the BSNL CSC (Customer Service Centre) / Authorized franchisee/retailer for mobile number porting request.

Step 3: Fill in a Customer Application Form (CAF) and pay the required porting fees for processing request. Currently, BSNL is not charging any fees for porting into their network.

Step 4: You will be issued a new BSNL SIM card. Upon approval of the porting request, BSNL will inform you of the date and time of porting. You are required to change your SIM card at the given time.

If you are facing any problems, contact the toll-free number 1800-180-1503 or call 1503.

1. Put indoor plants in bedroom, bathroom, basin place, kitchen window. Have not space? Don’t worry , do some creative and hang it wherever you feel perfect.

2. DIY with old wedding cards and other wasted products.

3. Making real bouquet from your garden and replace it with fresh flowers everyday.

4. Cleaning and dusting everyday.

5. Choosing curtains and colours according to your space

6. Light colour bedsheet.

7. Painting door of kitchen and washroom with creativity and beautiful arts.

8. Making arts on some corners of home like switch Board or behind the door.

9. Decorating stairs corner with greens (Areca palm, rubber plant, sygnonium etc).

10. Decorating terrace with colourful flowering plants.

11. Decorate your glass window with flowering hanging plants.

12. Making wall art by yourself.

13. Replace your old rugs in kitchen and hall.

14. Declutter, donate and clear your space.

15. Coat a paint to your old furniture or refrigerator with new look by yourself.

16. Showcase collectibles – It only takes few special antiques to start a collection. You can decorate them in a space collectively. These can be old copper or brass designer utensils, stuffs, old coins of different era etc.

17. Vintage bookcase (great edition especially for readers).

18. Light up a jug/bottle with fairy lights in a corner of your room.

19. Bathroom display shelf.

By using these tips and getting creative, you can give your home a fresh, stylish look without spending a lot of money.

Happy Decoration!!

1. Mindfulness and Meditation

Meditation: Regular meditation helps calm the mind and reduces stress. Practices such as mindfulness meditation, transcendental meditation, or guided meditation can be beneficial.
Mindfulness: Being present in the moment and aware of your thoughts and feelings without judgment helps in managing stress and anxiety.

2. Spiritual Practices

Yoga: Regular practice of yoga can enhance physical and mental well-being.
Prayer and Worship: Engaging in prayer or worship according to your religious or spiritual beliefs can provide comfort and peace.
Reading Spiritual Texts: Reading and reflecting on scriptures or spiritual literature can offer insights and tranquillity.

3. Healthy Lifestyle

Exercise: Regular physical activity releases endorphins, which improve mood and reduce stress.
Healthy Diet: A balanced diet can affect your mood and energy levels positively.
Sleep: Ensuring adequate and quality sleep is crucial for mental well-being.

4. Positive Relationships

Social Support: Surround yourself with supportive and positive people. Healthy relationships are essential for emotional well-being.
Communication: Open and honest communication with friends and family can help in relieving stress and gaining perspective.

5. Hobbies and Interests

Pursue Hobbies: Engage in activities that you enjoy and that bring you joy and relaxation.
Learn New Skills: Learning something new can be a great way to divert your mind from stress and bring satisfaction.

6. Mental Health Care

Therapy: Seeking help from a mental health professional can provide strategies and support for managing stress and anxiety.
Self-Help: Reading self-help books or attending workshops on stress management and personal development can be beneficial.

7. Gratitude and Positivity

Gratitude Practice: Regularly reflecting on things you are grateful for can shift your focus from negative to positive aspects of life.
Positive Thinking: Cultivating a habit of positive thinking can change your outlook on life and reduce stress.

8. Detachment and Acceptance

Detachment: Practice detachment from material desires and outcomes. This doesn’t mean not caring, but not being overly attached to specific results.
Acceptance: Accepting things that you cannot change and focusing on what you can control can bring peace.

9. Service and Charity

Helping Others: Engaging in acts of kindness and helping others can provide a sense of fulfilment and reduce personal stress.

10. Digital Detox

Limit Screen Time: Reducing time spent on digital devices, especially social media, can lower stress and anxiety levels.
Incorporate these practices into your daily routine and embark on a journey to inner peace and discover the joy of living a balanced, harmonious life.

Thank you for Reading!

“Sustainable life” refers to a lifestyle that aims to reduce one’s environmental impact, preserve natural resources, and ensure the well-being of future generations. It involves making choices that minimize waste, promote energy efficiency, support local and organic food production, and prioritize renewable resources. Sustainable living often includes practices such as recycling, using public transportation or carpooling, reducing energy consumption, and supporting sustainable products and businesses. The goal is to create a lifestyle that meets current needs without compromising the ability of future generations to meet their own needs.

How to live a sustainable life?

Living a sustainable life involves making conscious choices to reduce your environmental impact and support the well-being of the planet. Here’s a description of how to do it:

1. Reduce, Reuse, Recycle: Embrace the mantra of “reduce, reuse, recycle” by minimizing waste. Reduce your consumption of single-use items, reuse items when possible, and recycle materials like paper, glass, and plastic.
2. Conserve Energy: Use energy-efficient appliances and light bulbs, turn off lights and electronics when not in use, and consider renewable energy sources like solar power.
3. Conserve Water: Fix leaks, take shorter showers, and consider installing water-efficient fixtures. Collect rainwater for outdoor use if possible.
4. Support Sustainable Transportation: Use public transportation, carpool, bike, or walk instead of driving alone. Consider electric or hybrid vehicles if feasible.
5. Eat Sustainably: Choose locally grown, organic foods to reduce the carbon footprint of your meals. Reduce meat consumption or opt for sustainably sourced meat and seafood.
6. Reduce Plastic Use: Minimize the use of plastic bags, bottles, and packaging. Choose reusable alternatives whenever possible.
7. Support Sustainable Practices: Purchase products from companies that prioritize sustainability and ethical practices. Support local businesses and farmers markets.
8. Conserve Resources: Use resources like paper, wood, and minerals judiciously. Opt for recycled or sustainable materials when purchasing goods.
9. Educate Yourself and Others: Stay informed about environmental issues and share your knowledge with others. Encourage friends and family to adopt sustainable practices.
10. When buying products, check in the ingredients for palm oil. The expansion of palm oil plantations has resulted in the loss of biodiversity and ecosystem services in affected areas.
    One of the biggest concerns is the deforestation of tropical rainforests to make way for palm oil plantations. This has led to habitat loss for many species, including endangered ones like orangutans and tigers.

Living sustainably is a journey, and every small change can make a difference. By adopting these practices, you can reduce your ecological footprint and contribute to a healthier planet for future generations.

Why we need to live sustainably?

Living sustainably is important for several reasons:

• Environmental Conservation: Sustainable living helps protect the environment by reducing pollution, preserving natural resources, and minimizing waste. This is essential for maintaining biodiversity and ensuring the health of ecosystems.
• Climate Change Mitigation: By reducing greenhouse gas emissions and promoting renewable energy sources, sustainable living can help mitigate the effects of climate change and limit global warming.
• Resource Conservation: Adopting sustainable practices helps conserve finite resources such as water, energy, and minerals, ensuring they are available for future generations.
• Health and Well-being: Sustainable living can lead to improved air and water quality, as well as a healthier lifestyle through choices like organic food and active transportation, benefiting both individuals and communities.
• Economic Benefits: Sustainable practices can lead to cost savings over time by reducing energy and resource consumption. Additionally, sustainable industries can create new job opportunities and support local economies.
• Social Equity: Sustainable living promotes social equity by considering the needs of all people, including future generations, and striving for a more just and inclusive society.
• Global Responsibility: As part of a global community, living sustainably is a way to take responsibility for the impact of our actions on people and the planet, contributing to a more sustainable and equitable world for all.

Overall, sustainable living offers a holistic approach to life that benefits individuals, communities, and the planet.

Thanks for Reading!

Before embarking on any journey, it’s essential to take care of a few key tasks to ensure a smooth and enjoyable trip.
Here are some things to keep in mind before traveling:

1. Travel Documents: Before traveling, it’s essential to ensure you have all the necessary travel documents. Ensure you have your passport, visas, tickets, and any other necessary documents.
2. First aid kit: A well-packed first aid kit is an essential travel companion for any journey. It’s a safety net for unexpected bumps, bruises, or illnesses while you’re away from home.
3. Sustainability: Be mindful of your environmental impact and support local communities. Go for eco-friendly products that can be reused and easily biodegradable.
4. Be careful of scammers: Traveling can be an exciting and enriching experience, but it’s important to be aware of potential scams that could dampen your trip. Scammers often target tourists who may be unfamiliar with local customs and practices, making it crucial to stay vigilant and informed.
5. Destination Research: Know your transportation options and plan your routes in advance. Do some research about the place you are going to visit, You should know about the local scenario and weather conditions.
6. Accommodation: Pre-Book accommodations that suit your needs and budget.
7. Cultural Sensitivity: Respect local customs, traditions, and dress codes.
8. Money Matters: Carry local currency and have access to international payment methods.
9. Stay Connected: Have access to communication tools and know how to reach local emergency services.
10. Packing Wisely: Packing for a trip can often be a daunting task, but with a few smart strategies, you can make it a breeze. Start by making a list of essentials based on your destination, duration of stay, and planned activities. Roll your clothes to save space and prevent wrinkles, and use packing cubes to keep items organized. Pack versatile clothing items that can be mixed and matched, and don’t forget to check the weather forecast. Limit the number of shoes and accessories to essentials to save space and weight. Finally, remember to leave room for souvenirs and items you might acquire during your travels. With these tips, you’ll be able to pack efficiently and enjoy a stress-free journey.

By taking care of these important tasks before you travel, you can minimize stress and focus on enjoying your journey to the fullest.

Thanks For Reading!

How to Google AdSense approval: Are you struggling to get Google AdSense approval for your WordPress/other website(s)? The process of getting approved by AdSense can be very tedious and frustrating, but no need to worry about it! In this post, we will provide you some tips and tricks that can help you to get approved by AdSense.

1. Create website’s valuable content: Google AdSense values websites that provide valuable content to their readers/users. Make sure your website has high-quality content that is unique and engaging.
2. Choose a clean, professional, light theme: Your website’s design is an important role in getting AdSense approval. Make sure you choose a light weighted, professional and clean theme that is easy to navigate.
3. Improve your website speed: A slow website can negatively impact your AdSense approval chances. Use tools like https://pagespeed.web.dev/, GTmetrix or Pingdom to analyze your website’s speed and make necessary improvements.
4. Make sure your website is mobile-friendly: Currently more than 50% of internet users access the web through mobile devices. Make sure your website is mobile-friendly to improve your AdSense approval chances.
5. Avoid prohibited content: Google AdSense has very strict policies regarding prohibited content. Avoid publishing content that promotes violence, hate speech, or adult content.
6. Create a privacy policy page: A privacy policy page is a requirement for AdSense approval. Make sure you include a privacy policy page on your website along with adsense cookie policy.
7. Must Have a Contact Us page: Having a contact page on your website adds good credibility and trustworthiness. It also makes it easy for Google AdSense to contact you regarding your application.
8. Avoid excessive ads: If you are adding Too many ads can negatively impact user experience. Make sure you don’t have excessive ads on your website.

FAQs

1. What is Google AdSense program?
   Google AdSense is an advertising program by Google that allows website owners to monetize their website by displaying ads.
2. How does AdSense program work?
   AdSense works by displaying relevant ads on your website. When a user clicks on an ad, you can earn a commission.
3. How long time does it take to get approved by AdSense?
   It can take anywhere from a few days to a few weeks to get approved by AdSense. But it will subject to the website content quality.
4. How much can you earn with AdSense?
   Your earnings with AdSense depend on multiple factors such as your website’s niche, traffic, and ad placement.
5. What is a good click-through rate (CTR)?
   A good CTR is subjective and varies by niche. However, a CTR of 2–3% is considered good.
6. Can you use AdSense program with other ad networks program?
   Yes, you can use AdSense program with other ad networks program as long as you comply with Google’s policies.
7. Can you use AdSense on multiple websites?
   Yes, you can use AdSense on multiple websites as long as you comply with Google’s policies.
8. What to do if your AdSense application is rejected?
   If your AdSense application is rejected, you can reapply after making necessary improvements to your website.

Some Steps to Get Google AdSense Approval for WordPress/other website:

1. Sign up for AdSense.
2. Create valuable content on website.
3. Choose a professional theme.
4. Improve your website speed.
5. Ensure your website is mobile-friendly.
6. Avoid prohibited content.
7. Create a privacy policy page.
8. Have a Contact Us page.
9. Avoid excessive ads.
10. Add AdSense code to your website.
11. Wait for AdSense review.
12. Improve your website if rejected.
13. Reapply for AdSense.
14. Wait for final approval.
15. Start monetizing your website.

In conclusion,

getting Google AdSense approved for your WordPress/other website requires effort and patience. By following the tips and tricks mentioned in this post and complying with Google’s policies, you can increase your chances of getting approved by AdSense. Good luck!

Bael fruit, also known as wood apple, has been used in Ayurvedic medicine for its various health benefits. Bael juice, made from the pulp of the fruit, is particularly praised in Ayurveda for its therapeutic properties. Here are some of the amazing benefits of bael juice according to Ayurveda:

• Digestive Health: Bael juice is known for its digestive properties. It can help relieve constipation, diarrhea, and other digestive issues.
• Rich in Nutrients: Bael fruit is rich in vitamins, minerals, and antioxidants, including vitamin C, vitamin A, calcium, potassium, and fibre.
  3.Boosts Immunity: The high vitamin C content in Bael juice can help boost the immune system and protect against common illnesses.
• Anti-inflammatory: Bael juice has anti-inflammatory properties, which may help reduce inflammation in the body.
• Detoxifies the Body: Bael juice acts as a natural detoxifier and helps in cleansing the body of toxins and impurities. It helps in improving overall health and vitality.

2. Nariyal Pani /Tender Coconut Water :

Tender coconut water is a nutritious and refreshing beverage that offers a wide range of health benefits. Incorporating it into your diet can help you stay hydrated and improve your overall health and well-being.

• Hydration: Tender coconut water is an excellent source of hydration due to its high water content and electrolyte composition. It is rich in potassium, sodium, calcium, magnesium, and phosphorus.
• Nutrient-rich: Tender coconut water is low in calories and fat-free, making it a healthy alternative to sugary drinks. It contains vitamins such as vitamin C, B vitamins, and minerals like iron and zinc.
• Antioxidant Properties: Tender coconut water is rich in antioxidants, such as cytokinins, which help neutralize free radicals and reduce oxidative stress in the body.
• Heart Health: The potassium content in tender coconut water helps regulate blood pressure and maintain heart health.
• Skin Health: Tender coconut water is beneficial for skin health. It hydrates the skin, reduces the risk of acne, and promotes a clear and glowing complexion.

3. Sattu drink :

Sattu drink is a traditional Indian summer beverage that is not only refreshing but also nutritious. Sattu is a flour made from roasted chickpeas or grams, and the drink is made by mixing this flour with water, spices, and sometimes sweeteners.

Benefits of Sattu Drink:

• 1.Cooling: Sattu drink is naturally cooling and helps in beating the summer heat.
• 2.Hydration: It is a good source of hydration due to its high water content.
• 3.Nutritious: Sattu is rich in protein, fiber, and other nutrients, making it a healthy beverage choice.
• 4.Digestive Health: It aids in digestion and can help relieve digestive issues like acidity and bloating.

Here’s how you can make a basic sattu drink:
Ingredients:
2-3 tablespoons of sattu flour
1-2 cups of cold water
1-2 teaspoons of lemon juice (optional)
Salt to taste
Roasted cumin powder (optional)
Chopped mint leaves or coriander leaves (optional)
Sweetener of your choice (jaggery, sugar, or honey) – optional
Instructions:

1. In a bowl, mix the sattu flour with a little water to make a smooth paste.
2. Gradually add the remaining water and mix well to ensure there are no lumps.
3. Add lemon juice, salt, roasted cumin powder, and sweetener (if using). Stir well to combine.
4. Add chopped mint or coriander leaves for extra freshness.
5. Chill the drink in the refrigerator or serve it over ice cubes.

It is a versatile drink that can be enjoyed throughout the summer to stay cool and refreshed.

4. Raw Mango Juice/Aam Panna :

Aam panna is a popular Indian summer drink made from raw mangoes. It is known for its refreshing taste and numerous health benefits. Here are some of the benefits of aam panna:

• Electrolyte Balance: Aam panna is rich in minerals like potassium, which helps in maintaining electrolyte balance in the body.
• Antioxidant Properties: Raw mangoes are rich in antioxidants, which help in neutralizing free radicals and reducing oxidative stress in the body.
• Hydration: Aam panna is a hydrating drink that helps in replenishing fluids lost due to sweating in the summer months.
• Rich in Vitamin C: Raw mangoes are a rich source of vitamin C, which is essential for boosting immunity and maintaining overall health.
• Cooling Properties: Aam panna has natural cooling properties, making it an ideal drink to beat the summer heat and prevent heat stroke.
  Aam Panna is a refreshing and nutritious drink that offers a range of health benefits. It can be enjoyed on its own or mixed with spices like cumin and mint for added flavor and benefits.

5. Fennel and Mint Cooler Drink :

A mint and fennel seeds drink is a refreshing and healthy beverage that can be enjoyed throughout the day, especially during the hot summer months.

Benefits of Fennel and Mint cooler Drink:

• Digestive Health: Both mint and fennel seeds are known for their digestive properties. This drink can help relieve indigestion, bloating, and gas.
• Fresh Breath: Mint is a natural breath freshener, while fennel seeds can help neutralize bad breath.
• Antioxidant Properties: Both mint and fennel seeds are rich in antioxidants, which help protect the body against damage from free radicals.
• Anti-inflammatory: Mint has anti-inflammatory properties that can help reduce inflammation in the body.
• Hydration: This drink is a hydrating beverage that can help replenish fluids and prevent dehydration.

A mint and saunf (fennel seeds) drink is a refreshing and flavourful beverage that offers several health benefits. Here’s how you can make it:

Ingredients:
1 tablespoon of fennel seeds (saunf)
5-6 fresh mint leaves
1-2 teaspoon of honey or sugar (optional)
1-2 cups of water
Ice cubes
Instructions:
1. Crush the fennel seeds slightly to release their flavour.
2. Add the mint leaves to the fennel water, mix it well.
3. Strain the mixture to remove the fennel seeds and mint leaves.
4. Add honey or sugar if desired and stir until dissolved.
5. Chill the drink in the refrigerator or serve it over ice cubes.

6. Lemon and mint juice:

Lemon and mint juice offer several health benefits:

• rich in Vitamin C: Lemon juice is high in vitamin C, which helps boost the immune system, aids in iron absorption, and promotes skin health.
• Digestive Aid: Both lemon and mint juice can help with digestion. Lemon juice, especially when consumed in warm water, can stimulate the digestive system, while mint has been traditionally used to soothe the stomach.
• Hydration: Both juices can help keep you hydrated, which is essential for overall health and well-being.
• Antioxidant Properties: Lemon and mint are rich in antioxidants, which can help protect your cells from damage caused by free radicals.
• Refreshing and Cooling: Mint juice, in particular, is known for its cooling properties, which can be refreshing, especially in hot weather.
• Oral Health: Lemon juice has antimicrobial properties that may help with oral health, while mint can freshen breath.

7. Sugarcane juice :

Sugarcane juice, extracted from the sugarcane plant, is not only delicious but also offers several health benefits:

• Rich in Nutrients: Sugarcane juice is a good source of antioxidants, electrolytes, and a variety of vitamins and minerals, including calcium, magnesium, potassium, and iron.
• Hydration: It is an excellent thirst quencher and helps keep the body hydrated, especially in hot climates.
• Liver Detoxification: Some studies suggest that sugarcane juice may help in liver detoxification and improving liver function, although more research is needed in this area.
• Boosts Immunity: The antioxidants in sugarcane juice can help boost the immune system and protect against infections and diseases.

It’s important to consume sugarcane juice in moderation, as it is high in natural sugars, which can contribute to weight gain and other health issues if consumed in excess. Additionally, be cautious of sugarcane juice sold in markets, as hygiene standards in the preparation and serving of the juice can vary.

Making sugarcane juice at home is simple and requires only a few ingredients and tools. Here’s a basic recipe:

Ingredients:
Fresh sugarcane stalks
half lemon
ginger
salt for taste (optional)
Equipment:
Sugarcane juicer (manual or electric)
Knife
Strainer
Pitcher or glass
Instructions:

1. Wash the sugarcane stalks thoroughly under running water to remove any dirt or debris.
2. Using a sharp knife, cut the sugarcane into smaller pieces, about 1 to 2 inches in length, to fit into your juicer.
3. Add ginger
4. If using a manual juicer, feed the sugarcane pieces through the juicer one at a time, applying pressure to extract the juice.
5. Strain the extracted juice through a fine mesh strainer or cheesecloth to remove any pulp or solids.
6. Pour the strained juice into a pitcher or glass and serve immediately. Optionally, you can add a squeeze of lemon juice or a pinch of salt for flavor.
   Note: Freshly extracted sugarcane juice is best consumed immediately for maximum freshness and nutritional benefits.

8. Jal Jeera :

Jal-jeera is a popular Indian drink made from a blend of spices, herbs, and lemon. It offers several health benefits:

• Hydration: Since jal-jeera is primarily made with water, it helps keep the body hydrated, especially during hot weather.
• Cooling Effect: Jal-jeera is often served chilled and has a cooling effect on the body, making it a refreshing summer drink.
• Rich in Antioxidants: The spices and herbs in jal-jeera, such as cumin and mint, are rich in antioxidants, which can help protect the body from oxidative stress and reduce inflammation.
• Improves Appetite: The blend of spices in jal-jeera can help improve appetite and aid in better digestion of food.
• Digestive Aid: Jal-jeera is known for its digestive properties. The spices in jal-jeera, such as cumin, ginger, and black pepper, can help stimulate digestive enzymes and improve digestion.
• May Help Reduce Bloating: Some of the spices in jal-jeera, like cumin and ginger, are known for their carminative properties, which can help reduce bloating and gas.
• Rich in Vitamins and Minerals: Jal-jeera can be a good source of vitamins and minerals, depending on the ingredients used. For example, mint is rich in vitamin A and iron, while cumin is a good source of iron and manganese.
  Overall, jal-jeera is a flavorful and refreshing drink that not only tastes great but also offers several health benefits, especially for digestion and hydration.

9. Lassi :

Lassi is a traditional Indian drink made from yogurt, water, and spices. It offers several health benefits:

• Rich in Probiotics: Lassi is made from yogurt, which is a natural source of probiotics. These beneficial bacteria help maintain a healthy balance of gut flora, which is important for digestion and overall health.
• Digestive Aid: The probiotics in lassi can help improve digestion and reduce problems like bloating, gas, and constipation.
• Rich in Nutrients: Lassi is a good source of calcium, protein, and vitamins B12 and D. These nutrients are important for bone health, muscle function, and overall well-being.
• Hydration: Lassi is a hydrating drink, especially when consumed chilled. It can help replenish fluids and electrolytes in the body.
• Weight Management: Lassi can be a healthy addition to a weight loss or weight management diet. It is low in calories and can help keep you full, reducing the urge to snack.
• Cooling Effect: Lassi is often consumed during hot weather due to its cooling effect on the body. It can help regulate body temperature and provide relief from heat.
• Improves Immunity: The probiotics in lassi can help strengthen the immune system, reducing the risk of infections and illnesses.

10. Buttermilk :

Buttermilk is a fermented dairy drink that offers several health benefits:

• Rich in Probiotics: Like yogurt, buttermilk is rich in probiotics, which are beneficial bacteria that support gut health and digestion.
• Digestive Aid: The probiotics in buttermilk can help improve digestion and alleviate common digestive issues like bloating, gas, and constipation.
• Nutrient-Rich: Buttermilk is a good source of several nutrients, including calcium, potassium, vitamin B12, and riboflavin (vitamin B2), which are important for bone health, muscle function, and overall well-being.
• Low in Fat: Buttermilk is lower in fat and calories compared to regular milk, making it a healthier alternative for those watching their fat intake.
• Hydration: Buttermilk is a hydrating drink that can help replenish fluids and electrolytes in the body, especially during hot weather or after physical activity.
• May Help Lower Blood Pressure: Some studies suggest that the bioactive peptides in buttermilk may help lower blood pressure, although more research is needed in this area.
• May Boost Immunity: The probiotics and nutrients in buttermilk can help strengthen the immune system, reducing the risk of infections and illnesses.
  Buttermilk is a nutritious and refreshing drink that can be enjoyed on its own or used in cooking and baking to add flavor and texture to dishes.

Try these flavourful and healthy drinks this summer and Thank me later

Thank you for Reading!!

1. Invest in clothes wisely, choose alternate of Denim:

Do you know? From growing cotton to dyeing it to laundering finished products, producing blue jeans consumes a large amount of water (approx. 7600 litres of water for a pair of jeans) and that wastewater contains harmful chemicals and dyes.
Think buying a new pair of jeans and choose alternate of it. Also, whatever clothes you have just wear them by styling differently multiple times. Do not buy mindlessly any day with the hype of shopping anything any day. But when you need not just because your favourite influencer bought it.

2. Fix Plumbing leaks

3. Cut those long showers short

4. When not need, close the tap of water.

5. Turn off tap during brushing your teeth.

6. Use motor alarm to know if the water syntax is overflowing

7. Consume less meat:

Meat production requires a much higher amount of water than vegetables. According to IMF (2013 REPORT) – To produce 1 kg of meat requires between 5000 and 20,000 litres of water. So opt for plant based food as much as possible.

8. Filtered waste water –

Filtered waste water: maximum households believe that waste water from RO is dirty and is not of any use but but it is not a dirty water it’s tap water that is un filtered. so you should not waste this waste water as this is really injustice with environment use this in different source:
First one use this water for mopping the floor.
second to clean bathroom. 3rd for washing cars or other vans .
to water plants
to use in cooler
for washing dishes
for washing clothes or doing laundry
for washing cattles.

9. Waste water from kitchen:

Everyday there are litters of water wastage by preparing food. I use this waters for my plants. Waste water from kitchen could be water left after washing veggies, after washing pulses, rice, soybean or chana water . these waters are highly beneficial for plants as the contain some nutrition for plants. so do not discard them in Single use. use them for planting. water left after boiling potato ,chana etc are used to water plants.

10. Make sure you do not use harmful chemicals for cleaning and bathing as this water goes to soil and make it lace capable.

11. If you get your own area make your waste water goes to your own land and avoid hard chemicals toiletries.

12. Use less single use plastic as much as you can since it goes to river lakes ocean and make marine life disturbing.

13. For summer days use Earthen pots to get cold water instead of running the cold tap.

Conclusion:

lots of people say why it need to be done. Well, let me tell you. If not us, then who? It’s all in a hand to make our water system more breakable and we are capable of doing it. One person can make a difference hence joining hands together you and me can make a difference, for our future generation and for making our water and ecosystem usable we should do it.

So come on and join your hands too, to make this earth a peaceful living!

Java Interview Questions for Freshers and experienced: Here are the answers to your questions

1.Field Injection:

• Field injection is a type of dependency injection where dependencies are injected into the fields of a class.
• It is generally discouraged due to issues with testability, as it makes it harder to mock dependencies in unit tests.

2.Replication in Kafka:

• Replication in Kafka is important for fault tolerance and high availability.
• It involves replicating the log of messages across multiple brokers so that if one broker fails, another broker can take over serving the messages.

3.Serial Version:

• The serialVersionUID is a unique identifier for Serializable classes in Java.
• It is used during deserialization to ensure that the sender and receiver of a serialized object have loaded classes for that object that are compatible with respect to serialization.

4.Mutable Class:

• A mutable class is a class whose state can be changed after it is created.
• Mutable classes can lead to issues in concurrent programming and can make it harder to reason about the behavior of a program.

5.final, finally, finalize Difference:

• final is a keyword used to declare constants, make classes immutable, or prevent method overriding.
• finally is a block used in exception handling to ensure that a piece of code is always executed, whether an exception is thrown or not.
• finalize is a method in the Object class that is called by the garbage collector before an object is garbage collected. It is not recommended to use finalize for resource cleanup.

6.Data Hiding vs Data Abstraction:

• Data hiding is the concept of hiding the implementation details of a class from the outside world and only exposing a controlled interface.
• Data abstraction is the concept of representing essential features without including the background details or explanations.

7.API Gateway:

• An API Gateway is a server that acts as an API front-end, receives API requests, enforces throttling and security policies, passes requests to the back-end service, and then passes the response back to the requester.

8.Java 8 Features:

• Java 8 introduced several new features, including lambda expressions, the Stream API, functional interfaces, default methods in interfaces, and the java.time package for date and time manipulation.

9.Difference between final and static:

• final is used to declare constants or to prevent a variable from being reassigned.
• static is used to declare a class-level variable or method that is shared among all instances of the class.

10.Array vs Collection:

– Arrays are fixed in size and can hold only one type of elements, while collections are dynamic in size and can hold objects of different types.

11.ArrayList vs Vector:

– Both ArrayList and Vector are implementations of the List interface in Java.
– ArrayList is not synchronized, which means it is not thread-safe, while Vector is synchronized and therefore thread-safe.
– ArrayList is preferred for most applications due to its better performance, unless thread safety is required.

12.ArrayList vs LinkedList:

– ArrayList uses a dynamic array to store elements, while LinkedList uses a doubly linked list.
– ArrayList provides fast random access but slower insertion and deletion of elements, especially near the beginning.
– LinkedList provides fast insertion and deletion but slower random access.

13.Iterator vs ListIterator:

– Both Iterator and ListIterator are interfaces in Java used to iterate over collections.
– Iterator can be used to iterate over any collection, while ListIterator is specific to lists and provides additional functionality such as iterating in both directions and modifying the list during iteration.

14.List vs Set:

– Both List and Set are interfaces in Java that extend the Collection interface.
– List allows duplicate elements and maintains the insertion order, while Set does not allow duplicate elements and does not guarantee the order of elements.

15.HashSet vs TreeSet:

– HashSet is an implementation of the Set interface that uses a hash table for storage. It does not guarantee the order of elements.
– TreeSet is an implementation of the Set interface that uses a red-black tree for storage. It maintains the elements in sorted order.

16.Set vs Map:

– Set is a collection that contains unique elements, while Map is a collection that maps keys to values, where each key is unique.
– Set is used to store a collection of unique elements, while Map is used to store key-value pairs.

17.HashSet vs HashMap:

– HashSet is an implementation of the Set interface that uses a hash table for storage. It does not allow duplicate elements.
– HashMap is an implementation of the Map interface that uses a hash table for storage. It allows key-value pairs, and keys must be unique.

18.HashMap vs TreeMap:

– HashMap is an implementation of the Map interface that uses a hash table for storage. It does not guarantee the order of keys.
– TreeMap is an implementation of the Map interface that uses a red-black tree for storage. It maintains the keys in sorted order.

19.HashMap vs HashTable:

– HashMap is similar to HashTable but is not synchronized, which means it is not thread-safe. It allows null keys and values.
– HashTable is synchronized, which means it is thread-safe, but it does not allow null keys or values.

20.Comparable vs Comparator:

– Comparable is an interface in Java that allows you to define a natural ordering for a class.
– Comparator is an interface in Java that allows you to define a custom ordering for a class. It is useful when you want to sort objects in a different order than their natural ordering.

21.Hash Collision:

– Hash collision occurs when two different keys hash to the same index in a hash table.
– When a hash collision occurs, the hash table uses a method such as chaining or open addressing to resolve the collision.

22.Convert Arrays to ArrayList:

– You can convert an array to an ArrayList using the Arrays.asList() method.
– Example: List<Integer> list = new ArrayList<>(Arrays.asList(array));

23.Consumer Group:

– A consumer group is a group of consumer instances that jointly consume a set of topic partitions.
– Each consumer group has a unique group id, and each message is consumed by only one consumer instance within the group.

24.JPA vs Hibernate:

– JPA (Java Persistence API) is a specification for managing relational data in Java applications.
– Hibernate is an implementation of the JPA specification and provides additional features beyond the standard JPA.

25.Dependency Injection:

– Dependency injection is a design pattern in which the dependencies of a class are provided to it from the outside rather than created within the class.
– This pattern promotes loose coupling and makes classes easier to test and maintain.

26.Implementing Spring Security in a Spring Boot Application:

– To implement Spring Security in a Spring Boot application, you need to add the spring-boot-starter-security dependency to your pom.xml or build.gradle file.
– You also need to create a class that extends WebSecurityConfigurerAdapter and override the configure(HttpSecurity http) method to configure security settings.

27.Different Messaging Protocols:

– Some common messaging protocols include MQTT, AMQP, and STOMP.
– These protocols define the format and rules for exchanging messages between systems in a distributed environment.

28.Session Factory and Session:

– In Hibernate, a session factory is used to create sessions, which represent a single-threaded unit of work with the database.
– The session factory is typically created once during application startup, and sessions are created and closed as needed during the application’s lifecycle.

29.Transaction:

– A transaction is a unit of work that is performed as a single, indivisible operation.
– In database systems, transactions ensure that either all the operations in the transaction are completed successfully, or none of them are.

30.Time Complexity:

– Time complexity is a measure of the amount of time an algorithm takes to run as a function of the input size.
– Common time complexities include O(1) for constant time, O(log n) for logarithmic time, O(n) for linear time, O(n^2) for quadratic time, and O(2^n) for exponential time.

31.Consumer Group:

– A consumer group is a group of consumer instances that jointly consume a set of topic partitions in Apache Kafka.
– Each partition in a topic is consumed by exactly one consumer instance within a consumer group.

32.Identifier Generation:

– Identifier generation refers to the process of generating unique identifiers for objects in a system.
– In databases, identifiers are often generated using auto-increment columns or sequences.

33.Unbalanced Cluster in Kafka:

– An unbalanced cluster in Apache Kafka occurs when the partitions of a topic are not evenly distributed across the brokers in the cluster.
– This can lead to uneven load distribution and performance issues.

34.get() and load() Method Difference:

– In Hibernate, the get() method immediately hits the database and retrieves the object, returning null if not found.
– The load() method returns a proxy object and defers the database hit until the object is accessed, throwing an exception if not found.

35.Microservice Design Patterns:

– Microservice design patterns are patterns and best practices for designing and implementing microservices architectures.
– Some common microservice design patterns include service discovery, circuit breaker, and event sourcing.

36.Composite Key:

– A composite key is a key that consists of more than one attribute to uniquely identify an entity in a database.
– Composite keys are often used when a single attribute is not sufficient to uniquely identify an entity.

37.How to Create a Spring Boot Application:

– To create a Spring Boot application, you can use Spring Initializr (https://start.spring.io/) to generate a new project with the dependencies you need.
– You can then import the project into your favorite IDE and start coding your application.

38.List of Annotations in Spring Boot:

– Some common annotations in Spring Boot include @SpringBootApplication, @RestController, @Service, @Autowired, @GetMapping, @PostMapping, and @Component.

39.Why Use @Autowired:

– @Autowired is used in Spring to automatically wire dependencies into a class.
– It helps in achieving loose coupling and makes the code more testable.

40.Difference Between JpaRepository and CrudRepository:

– Both JpaRepository and CrudRepository are interfaces in Spring Data JPA.
– JpaRepository provides additional methods for querying and managing entities compared to CrudRepository.

41.Table Join:

– Table join is a database operation that combines rows from two or more tables based on a related column between them.
– There are different types of joins, including inner join, outer join (left, right, and full), and cross join, each serving different purposes in combining data from tables.

42.@SpringBootApplication and Combined Annotations:

– @SpringBootApplication is a convenience annotation in Spring Boot that combines @Configuration, @EnableAutoConfiguration, and @ComponentScan.
– It is used to mark the main class of a Spring Boot application.

43.@RestController and @ResponseBody:

– @RestController is a specialized version of the @Controller annotation in Spring MVC that is used to create RESTful web services.
– @ResponseBody is used to indicate that the return value of a method should be serialized directly to the HTTP response body.

44.Design Patterns in Your Application:

– This question would depend on the specific application being discussed. Common design patterns used in applications include MVC (Model-View-Controller), Singleton, Factory, and Observer patterns.

45.Difference Between Monolithic and Microservices:

– A monolithic architecture is a single, indivisible unit where all the components are tightly coupled and deployed as a single application.
– Microservices architecture is an approach where an application is divided into small, independent services that are loosely coupled and can be deployed and scaled independently.

46.Actuator:

– Actuator is a feature in Spring Boot that provides monitoring and management endpoints for your application.
– These endpoints can be used to check the health of the application, view metrics, and perform other administrative tasks.

47.Getting Data from DB Without Service Class in Controller Only:

– It is not recommended to directly access the database from the controller layer in a Spring application.
– Instead, you should use a service class to encapsulate the business logic and interact with the database.

48.Tomcat Server Exclusion:

– To exclude Tomcat server from a Spring Boot application, you can exclude the spring-boot-starter-tomcat dependency and include an alternative server dependency, such as spring-boot-starter-undertow for Undertow or spring-boot-starter-jetty for Jetty.

49.OAuth and Difference Between OAuth 1.0 and OAuth 2.0:

– OAuth is an open standard for access delegation, commonly used for authorization in web applications.
– OAuth 1.0 is an older version of the protocol that uses a signature method for authentication, while OAuth 2.0 is a newer version that simplifies the protocol and introduces new features.

50.How Microservices Connect with Each Other:

– Microservices can connect with each other using various protocols such as HTTP, REST, messaging (e.g., Kafka, RabbitMQ), or gRPC.
– Service discovery mechanisms like Eureka or Consul can also be used to facilitate communication between microservices.

51.Exception Handling:

– Exception handling is a mechanism in Java for dealing with errors and other exceptional events that occur during the execution of a program.
– It involves using try-catch blocks to catch and handle exceptions, and using throw statements to throw exceptions.

52.Cache:

– Cache is a temporary storage area where frequently accessed data can be stored for quick access.
– In Java, caching can be implemented using libraries like Ehcache, Guava Cache, or the caching support provided by frameworks like Spring.

53.Thread:

– A thread is the smallest unit of execution within a process in a multitasking operating system.
– Java programs can use multiple threads to perform tasks concurrently, allowing for better performance and responsiveness.

54.Basic Core Java Concepts:

– Basic core Java concepts include data types, variables, operators, control flow statements (if-else, loops), classes, objects, inheritance, polymorphism, and exception handling.

55.Cloneable Class:

– Cloneable is a marker interface in Java that indicates that a class is allowed to be cloned using the clone() method.
– The clone() method creates and returns a copy of the object.

56.Marker Interface:

– A marker interface in Java is an interface with no methods, used to indicate a certain capability or property of a class.
– Examples include the Serializable interface and the Cloneable interface.

57.ControllerAdvice Annotation:

– @ControllerAdvice is an annotation in Spring MVC used to define global exception handlers and model attributes for all controllers.
– It is commonly used to centralize exception handling and reduce duplicate code across controllers.

58.Difference Between Interface and Functional Interface:

– An interface in Java is a reference type, similar to a class, that can contain only constants, method signatures, default methods, static methods, and nested types.
– A functional interface is a special type of interface that contains only one abstract method, known as the functional method.
– Functional interfaces can be used as the target for lambda expressions or method references.

59.Difference Between Abstract Class and Interface:

– An abstract class in Java is a class that cannot be instantiated and may contain abstract methods that must be implemented by its subclasses.
– An interface is a reference type in Java that defines a set of methods that a class must implement.
– While a class can extend only one abstract class, it can implement multiple interfaces.

60.SOLID Principles in Java:

– SOLID is an acronym for five design principles in object-oriented programming: Single Responsibility Principle, Open/Closed Principle, Liskov Substitution Principle, Interface Segregation Principle, and Dependency Inversion Principle.
– These principles are guidelines for designing software that is easy to maintain and extend.

61.Volatile Keyword:

– The volatile keyword in Java is used to indicate that a variable’s value will be modified by different threads.
– It ensures that changes to the variable made by one thread are immediately visible to other threads, preventing thread caching of the variable’s value.

62.Spring vs Spring Boot Difference:

– Spring is a comprehensive framework for building Java applications, providing features such as dependency injection, aspect-oriented programming, and transaction management.
– Spring Boot is a sub-project of the Spring Framework that provides a set of tools and conventions for rapidly building and deploying Spring applications.

63.Microservice Advantage and Disadvantage:

– Advantages of microservices include scalability, maintainability, and the ability to use different technologies for different services.
– Disadvantages include increased complexity, the need for inter-service communication, and the potential for performance overhead.

64.Microservice Design Patterns:

– Microservice design patterns are patterns used to address common challenges and requirements in microservices architectures.
– Examples include service discovery, circuit breaker, and bulkhead patterns.

65.Saga Design Pattern:

– Saga is a design pattern used to manage distributed transactions in a microservices architecture.
– It breaks down a large transaction into a series of smaller, independent transactions that can be individually rolled back if necessary.

66.Immutable Object:

– An immutable object is an object whose state cannot be changed after it is created.
– Immutable objects are inherently thread-safe and can simplify concurrent programming.

67.Design Patterns in Java:

– Design patterns in Java are reusable solutions to common problems encountered in software design.
– Examples include creational patterns (e.g., Singleton, Factory), structural patterns (e.g., Adapter, Decorator), and behavioral patterns (e.g., Observer, Strategy).

68.Map and FlatMap Difference:

– In Java streams, map() is used to transform each element of a stream into another object using a Function, while flatMap() is used to transform each element into zero or more elements of a different type, and then flatten the results into a single stream.

69.Spring Batch Components:

– Spring Batch is a framework for batch processing in Java applications.
– It provides components such as Job, Step, ItemReader, ItemProcessor, and ItemWriter for defining and executing batch jobs.

70.Item Processor in Spring Batch Job:

– In Spring Batch, an ItemProcessor is an interface used to process items read by an ItemReader before they are written by an ItemWriter.
– It allows you to perform data transformation or filtering logic on the items.

71.Difference Between afterJob and beforeJob in Spring Batch Job:

– afterJob and beforeJob are callback methods in the JobExecutionListener interface in Spring Batch.
– beforeJob is called before a job is executed, while afterJob is called after a job has completed, regardless of whether it succeeded or failed.

72.Second Level Cache in Hibernate:

– Second-level cache in Hibernate is a cache that stores objects across sessions, allowing for more efficient access to frequently accessed data.
– It helps reduce the number of database queries by caching query results and entity objects.

73.Field Injection:

• Field injection is a form of dependency injection where dependencies are injected into the fields of a class.
• It is generally discouraged in favor of constructor injection or setter injection, as it can make classes harder to test and maintain.

74.Replication in Kafka:

• Replication in Apache Kafka is the process of copying data (topics and partitions) from one broker to another to ensure fault tolerance and high availability.
• Replication is important because it ensures that if a broker fails, another broker can take over serving the data.

75.Serial Version:

• Serial Version UID is a unique identifier used by the serialization mechanism in Java to ensure that the correct version of a class is used during deserialization.
• It is a static final field of type long that should be declared in a Serializable class.

76.Mutable Class:

• A mutable class is a class whose state can be changed after it is instantiated.
• In Java, mutable classes are those that have setter methods or allow their internal state to be modified directly.

77.Final, Finally, Finalize Difference:

• final is a keyword in Java used to declare constants, mark methods as not overrideable, or prevent inheritance of a class.
• finally is a block in Java used in exception handling to execute code that should always run, regardless of whether an exception is thrown or not.
• finalize is a method in the Object class that is called by the garbage collector before an object is reclaimed. It is rarely used in modern Java programming due to its unpredictability.

78.Data Hiding vs Data Abstraction:

• Data hiding is the concept of hiding the implementation details of a class and only exposing a controlled interface to the outside world.
• Data abstraction is the concept of representing the essential features of a class without including the background details or explanations.

79.API Gateway:

• An API Gateway is a server that acts as a single entry point for clients to access multiple backend services or APIs.
• It is responsible for routing client requests, enforcing security policies, and aggregating the responses from multiple services.

80.Java 8 Features:

• Java 8 introduced several new features, including lambda expressions, the Stream API, functional interfaces, and the new java.time package for date and time manipulation.

Mango Recipes: need to know what we can do with raw mango

1. Aam Panna(Raw Mango Cooler): Summer Delights

The Perfect Summer cooler recipe

Here’s a simple recipe for Aam Panna:

Aam Panna Ingredients:

1. 2 medium-sized raw mangoes
2. 1 cup sugar (adjust to taste)
3. 1 tablespoon roasted cumin powder
4. 1 teaspoon black salt
5. 1/2 teaspoon salt
6. Mint leaves for garnish
7. Ice cubes

Instructions:

1. Wash the raw mangoes and pressure cook them until soft. Alternatively, you can boil them in a pot of water until soft.
2. Once cooked, let the mangoes cool down. Peel the skin off and remove the pulp into a bowl, discarding the seeds.
3. Add sugar to the mango pulp and mix well until the sugar dissolves.
4. Add roasted cumin powder, black salt, and regular salt to the mango mixture. Mix well.
5. Blend the mixture in a blender until smooth. You can adjust the consistency by adding water if it’s too thick.
6. Transfer the Aam Panna to a jug and refrigerate for at least an hour.
7. Serve chilled, garnished with mint leaves and ice cubes.

Enjoy the refreshing taste of Aam Panna!

2. Raw Mango Murabba

Here’s a simple recipe for Raw Mango Murabba:

Ingredients:
2 medium-sized Raw Mangoes
2 cups Jaggery powder
1 cup water
1/2 teaspoon Cumin seeds
1/2 teaspoon Fennel seeds
1/2 teaspoon Roasted Coriander powder
1 or 2 Bay Leaf
1 teaspoon Ghee
1 Red chilli (optional)

Instructions:

1. Wash the raw mangoes and peel them. Cut them into thin slices.

2. In a pan, put ghee and add bay leaf, red chilli, cumin seeds and fennel seeds, cook for few seconds till they start spluttering.
3. Add Mango pieces into pan, stir until mangoes are golden brown and soft.
4. In another pan, combine Jaggery powder and water. Bring to two to three boils, stirring until the jaggery dissolves completely.
5. Add the raw mango pieces to the jaggery syrup. Cook on low heat for about 15-20 minutes, or until the syrup thickens.
6. Add Roasted coriander powder to the mixture. Stir well.
7. Turn off the heat and let the murabba cool to room temperature.
8. Once cooled, transfer the murabba to a clean, dry jar. Store it in the refrigerator.
9. Serve the raw mango murabba as a sweet and tangy condiment or dessert.

Enjoy your homemade Raw Mango Murabba!

3. Khatti Meethi Aam chutney –

Here’s a simple recipe for Raw Mango Chutney:

Ingredients:
4 medium-sized raw mango
1/2 cup grated coconut
1/2 teaspoon cumin seeds
1/4 teaspoon turmeric powder
1 tablespoon ghee
Sugar to taste
Water as needed

Instructions:

1. Wash the raw mangoes and pressure cook them until soft.
2. Heat ghee in a pan and add cumin seeds and sauté for a few seconds.
3. Add boiled raw mango to the pan and add one cup water. Cook for 5 to 10 minutes.
4. Add turmeric powder and sugar the pan. Mix well and cook for another 5 minutes.
5. Add grated coconut to the pan and mix well. Cook for 5 minutes at low heat.
6. Remove the pan from heat and let the mixture cool down.
7. Transfer the chutney to a serving bowl. Serve as a side dish.

Enjoy your tangy Raw Mango Chutney!

4. Aam Pudina(Mint) chutney-

Here’s a recipe for Raw Mango and Pudina (Mint) Chutney:

Ingredients:
1 medium-sized raw mango, peeled and chopped
1/4 cup fresh mint leaves
1/2 cup fresh coriander leaves
1-2 green chilies
1 tablespoon chopped ginger
1/2 teaspoon cumin seeds
Salt to taste
Water as needed

Instructions:

1. In a blender, combine the chopped raw mango, mint leaves, coriander leaves, green chilies, ginger, cumin seeds, and salt.
2. Blend the ingredients, adding a little water if needed, to make a smooth chutney.
3. Taste and adjust the seasoning as per your preference.
4. Transfer the chutney to a serving bowl.
5. Serve the raw mango and pudina chutney with snacks like samosas, pakoras, or use it as a spread for sandwiches and wraps.

Enjoy the refreshing and flavorful Raw Mango and Pudina Chutney!

5. Raw Mango tangy kachri –

Here’s a recipe for Raw Mango Khatti Khachri, a tangy and spicy Indian relish:

Ingredients:
1 medium-sized raw mango, peeled and grated
1/4 cup mustard oil
1/4 teaspoon mustard seeds (rai)
1/4 cumin seeds (jeera)
1/4 teaspoon fenugreek seeds (methi)
1/4 teaspoon fennel seeds (saunf)
1/4 teaspoon turmeric powder
1/2 teaspoon red chili powder
Salt to taste
Sugar to taste

Instructions:

1. Heat mustard oil in a pan until it starts to smoke. Remove from heat and let it cool to room temperature.
2. In a separate bowl, mix grated raw mango with salt and sugar. Set aside for 10-15 minutes.
3. Heat the cooled mustard oil in a pan. Add mustard seeds, fenugreek seeds and fennel seeds. Cook until the seeds start to splutter.
4. Add turmeric powder and red chili powder to the pan. Mix well.
5. Add the grated raw mango mixture to the pan. Stir well to combine.
6. Cook the mixture on low heat for about 10-15 minutes, stirring occasionally, until the raw mango is soft and cooked.
7. Remove from heat and let it cool to room temperature.
8. Transfer the Tangy khachri to a clean, dry jar. Store it in the refrigerator.
9. Serve the Raw Mango Khatti Khachri as a side dish or condiment with meals.

Enjoy the tangy and spicy flavours of Raw Mango Tangy Khachri!

6. Raw Mango Rice –

Here’s a recipe for Raw Mango Rice, a flavorful South Indian dish:

Ingredients:
1 cup raw mango, peeled and grated
1 cup cooked rice (preferably leftover and cooled)
2 tablespoons oil
1 teaspoon mustard seeds
1 teaspoon cumin seeds
2-3 dry red chilies, broken into pieces
8-10 curry leaves
1/4 teaspoon turmeric powder
1/4 teaspoon asafoetida (Hing)
Salt to taste
2 tablespoons peanuts, roasted (optional)
Fresh coriander leaves for garnish

Instructions:

1. Heat oil in a pan. Add mustard seeds and let them splutter.
2. Add cumin seeds, dry red chilies, and curry leaves. Sauté for a few seconds.
3. Add grated raw mango and sauté for 3-4 minutes, or until the raw mango is slightly cooked.
4. Add turmeric powder, asafoetida, and salt. Mix well.
5. Add the cooked rice to the pan. Mix gently to combine all the ingredients.
6. Add roasted peanuts and mix well.
7. Cook for another 2-3 minutes, stirring occasionally.
8. Remove from heat and garnish with fresh coriander leaves.
9. Serve hot or at room temperature.

Enjoy the tangy and aromatic Raw Mango Rice!

These recipes are not only delicious but also a great way to beat the summer heat while enjoying the unique flavour of raw mangoes.
Try them out and treat yourself to a burst of flavours this summer!

Thank You for Reading!